gimard

Members
  • Content count

    244
  • Joined

  • Last visited

Community Reputation

3 Neutral

3 Followers

About gimard

  • Rank
    Expert *
  • Birthday 05/02/1973

Contact Methods

  • MSN
    widy73@hotmail.com
  • Biographie
    COUPE DES CHAMPION 2005 4X2 PRO EXP *

Profile Information

  • Passions
    la cuisine et le modelisme
  • Occupation
    dessinateur projeteur
  1. Atsushi Hara's Road to Reedy Race 2018 Friday, June 1, 2018 3:00:14 AM America/Los_Angeles We are honored to have had such an iconic person in R/C such as Atsushi Hara himself driving our car on an international level! Follow his journey towards following up to the Reedy Race 2018 invitational class. Upon receiving the XQ1 Kits, Hara quickly built up two kits. One to run our XOC dynamic rear toe in system and one with your traditional rear hub. Hara only got to run 6 packs due to bad weather before leaving for America. Upon arriving at America, Hara wasted no time and started preparing the cars to make sure they were at the best before hitting the track. Some action shots from the intense racing out of the 12 rounds from the invitational class. Different from normal racing is that this race takes the format of 12 racing rounds with no qualifying and computer generated random starting spots. Here we can see Hara preferred to run the car with only four topdeck screws. All smiles for Hara as he finds a very good well balanced setup towards the end of the event. Hara finally got his car sorted in the final round and snagged his first win which allowed him to finish 15th, a bit low for his expectations for sure but on the bright side he has gained a good understanding of the car which will allow him to get better results in the future. Photo Credit: www.redrc.net Setup - W/ XOC
  2. Aluminum bottom chassis for Execute XQ1, used for in either High Grip Asphalt or Carpet. By adding more weight to the lowest point of the chassis, this increases stability and lowers the center of gravity!
  3. Change how your car behaves in the middle of the corner with the Xpress on-power Control System (XOC), adjust the angle with spacers to differ the toe-in change during suspension compression. Quick change between dynamic and static rear toe in is made simple, to go back to static rear toe in, just install the included spacer underneath the rear aluminum hub and remove the connecting link! Included are the Hard Composite arms for maximum corner speed!
  4. Xpress Execute XQ1 chassis balance weight sets Xpress have introduced a range of chassis balance weight sets for the Execute XQ1 touring car kit. Available are two 4-piece sets of 10g/5g or 15g/10g front and rear weights and also 2-piece set of 25g and 15g centreline weights. All are made using high-quality brass material and they come with gold-colour marking for easy identification. Included in each set is also suitable hardware that allows for quick and easy attachment or removal. Source: Xpress [rc-xpress.com]
  5. Xpress Execute XQ1 adjustable battery stops Coming from Xpress and made for the Execute XQ1 touring car are new adjustable LiPo battery stoppers. The parts are machined from high-quality aluminium and come black and red anodised for wear and looks. The front stop will be attached to the chassis in a fixed position while the rear one is of a sliding design that allows to adapt to LiPo packs of different length. This results in more securely fixed batteries and more reliable battery mounting. Source: Xpress [rc-xpress.com]
  6. Xpress 4.5mm & 4.25mm aluminium hex adapters Xpress have introduced their new 4.5mm and 4.25mm offset aluminium wheel hex adapters for the Execute XQ1 touring car. The 12mm adapters are machined from aluminium, they come black anodised for looks and laser-etched for easy identification. The different offsets help to fine-tune the front and rear track width and the adapters, that come as pairs, are usable on Xpress’ own XQ1 and also other brand’s kits such as the Xray T4. Source: Xpress [rc-xpress.com]
  7. Xpress Execute XQ1 carbon upper bumper plate Xpress have introduced a carbon fibre bumper support plate for the Execute XQ1 and the forthcoming XQ1S touring car. The part is machined from high-quality cabin fibre and it is a direct replacement for the standard moulded composite item. Included beside the upper plate are also suitable bushings and mounting hardware. Source: Xpress [rc-xpress.com]
  8. Quelque option Xpress Execute XQ1 camber link stiffener set Coming from Xpress and made for the Execute XQ1 touring car is a camber link stiffener set. By changing the front upper links to a triangular system, the C-hub is stiffened which provides a more predictable handling especially on high grip tracks. The set is a direct fit and includes all necessary hardware.
  9. Bonjour à tous Voici la petite dernier de Rc-xpress la Excute XQ1
  10. je vends 3 chargeurs 1 Radiolink cp620 750w - chargeur Duo - 13V - 80 euro 1 cell master legend blue - Muchmore - 12V - 60 euro 1 skurc S60 - secteur 220 - 40 euro 1 CDR-5000 Futaba - chargeur Vintage - 60 EURO
  11. Bonjour à tous Je cherche vario ORCA VX3 ou R32 ... Faire proposition.
  12. Bonsoir 

    Possible Vario, moteur, pour 120 euro de plus 

    1. N.fromentin 35

      N.fromentin 35

      Bonjour.

      C'est parfait, merci beaucoup.

      J'ai envoyé un mail à le personne susceptible d'être intéressée.

      J'ai de ses nouvelles dans la journée.

      Cordialement.

      FROMENTIN Nicolas.

    2. gimard
  13. tu rentre plus fort dans les virages.