Reporter

Team Wave - RB-50 & RB-30 Professional speed controller (Brushless/Brush)

101 posts in this topic

mise a jour du nouveaux soft v2.2F

http://www.teamwaveonline.com/2007/RBS_V2%5B2_2_f%5D.zip

Important! Please read the v22f timing chart.txt before upgrade!!

Release date: 17/07/2011

*For version 2.1e or 2.02g user, please reset the timeshift and turbo setting to a lower value after firmware upgrade since timeshift and turbo value is increased in V2.2

*For other version user, please upgrade the firmware to V2.1e prior to install V2.2 and set timeshift/turbo to a lower value before use.

*Suggested starting gear ratio for 10.5T to 13.5T is 7.0 , 17.5T to 21.5T is 5.5

*For best performance, user can add hardware motor timing if motor temperature does not exceed 80C

*Maximum value of timeshift + turbo is 60.

*Timeshift value 4-6 and turbo value 4-6 is a good starting point for all motors.

Share this post


Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now