• Document sans nom
    Piecesautostore.Fr
    www.Topbildeler.Co.No
       
       
  • Sign in to follow this  
    Followers 0

    RC10F6 Factory Team


    ciol77
     
     
    RC10F6 Factory Team

    RC10F6 Factory Team

    1:10 Scale Electric 2WD On-Road Competition Race Car

    Team Associated is proud to release its entry to the 1:10 scale 2WD electric formula car racing class, the RC10F6 Factory Team Kit, geared for precision and the ultimate in performance.

    Full-scale Formula racing is considered one of the most elite forms of racing in existence, with technology and looks off the chart. The engineers behind the doors of Area 51 put maximum effort into the design of the RC10F6 FT kit to make sure the same could be said about their scaled-down version. With a full cast of setting options, an ultra-low center of mass, and sleek styling, the RC10F6 FT is designed to put you at the front of the Formula grid.

    With an increase in entries greater than any class at the highly contested ETS series, Formula is growing at a rapid rate. All aspects of the RC10F6 FT were considered and optimized to make sure it would stand above its competition. Performance, adjustability, durability, and style were weighed heavily, and the RC10F6 FT kit shows its hand with a complete package of adjustments and options right out of the box. From front to back, with graphite control arms, the fully adjustable front end, the ultra-smooth rear pivot, and wings styled after current full-scale Formula rulings, no corner was left untouched. At an affordable price point, the RC10F6 FT comes with everything to assure you will be at the front of the pack. With such a well-balanced platform, it's easy to see that the RC10F6 FT kit is another Champion by Design from Team Associated!
     
    This vehicle needs extra parts to make it operational. Click on the SPECS tab above to see what extra equipment you'll need to make the vehicle operational, such as motor and battery pack.
    Prototype shown. Due to ongoing R&D, photos may not match final kit. RC10F6 Factory Team Kit shown on these pages equipped with items NOT included in kit: Reedy motor, battery, ESC, servo, receiver, wheels, tires, body, and pinion gear. Assembly and painting required.

    Features

    • 2.5mm graphite chassis for optimized flex characteristics
    • Front and rear wings modeled after 2017 Formula rules included
    • FOX(R) Genuine Kashima Coat center shock for minimal friction and extended wear
    • Chassis design allows for multiple battery configurations
    • New center pivot design for optimized rear pod assembly
    • Lightweight graphite axle for increased durability and rigidity
    • Differential thrust bearing assembly for smooth action and extended life between rebuilds
    • Rear axle accepts all standard spur gears without adapter
    • Two steering bellcrank options for fine tuning Ackermann and steering rate
    • Servo mounts can be switched from "fixed" to "floating" to allow more flex in the front of the chassis
    • Integrated droop posts for adjusting droop without disassembly
    RC10F6 Factory Team
    Part # Description Price Buy
    8023 RC10F6 Factory Team Car Kit
    MSRP: $499.99
    Web: $339.99
    Out of Stock
    NOTIFY ME WHEN IN STOCK:
     

    Video

    Product Brochure

    PR-Docs_013017_RC10F6-Kit.jpgsource site team associated

    3_4_Front_Low_md - Copie.jpg

    3_4_Rear_Low_md - Copie.jpg

    Artsy_Apex_Low_md - Copie.jpg

    Bellcrank_Steering_Detail_md - Copie.jpg

    Carbon_Front_Arms_md - Copie.jpg

    Front_High_md.jpg

    Front_Low_md.jpg

    King_Pin_Axle_md.jpg

    Profile_High_md.jpg

    Profile_High2_md.jpg

    Profile_Low_md.jpg

    Rear_Axle_Diff_md.jpg

    Rear_Center_Pivot_Detail_md - Copie.jpg

    Rear_Center_Pivot_md.jpg

    Rear_High_md.jpg

    Rear_Low_Detail_md - Copie.jpg

    Str_Down_md.jpg

    Underside_Chassis_md.jpg

    Edited by ciol77

    Sign in to follow this  
    Followers 0


    User Feedback


    Il y a 20 heures, steenarigno a dit :

    C'est beau... très inspiré X-Ray...

      Stéphane.

    yop steph,tu trouve ?? j'ai beau chercher je trouve que ce sont quand même deux chassis bien different,bon en même temps comment ne pas avoir deux f1 qui se ressemble surtout que la xray marche fort ,donc a voir ,mais je compte bien le savoir tres vite

    lolo

    1 person likes this

    Share this comment


    Link to comment
    Share on other sites

    LOL, oui en regardant de près et en affinant : la triangulation av fait stt penser à la Roche, qui marche fort d'ailleurs... L'originalité, je trouve, vient des "renvois" latéraux en carbone au-dessus des links... La platine servo est la clone en look de la X-Ray...

    Tu vas t'en prendre une ?

    Moi, je reste fidèle à X-Ray : qualité et compatibilité des pces... et puis en TT, pro Losi dc Asso pas good LOL !!

      Stéphane.

    Share this comment


    Link to comment
    Share on other sites

    yop

    yes steph je m'en prendre une ,moi c'est asso aujourd'hui j'ai mais periode ou full asso ou full schum la je suis en mode asso ,

    loic

    Share this comment


    Link to comment
    Share on other sites


    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!


    Register a new account

    Sign in

    Already have an account? Sign in here.


    Sign In Now



  • Upcoming Events

    No upcoming events found
  • Topics

  • Posts

    • Atsushi Hara's Road to Reedy Race 2018 Friday, June 1, 2018 3:00:14 AM America/Los_Angeles We are honored to have had such an iconic person in R/C such as Atsushi Hara himself driving our car on an international level! Follow his journey towards following up to the Reedy Race 2018 invitational class. Upon receiving the XQ1 Kits, Hara quickly built up two kits. One to run our XOC dynamic rear toe in system and one with your traditional rear hub. Hara only got to run 6 packs due to bad weather before leaving for America. Upon arriving at America, Hara wasted no time and started preparing the cars to make sure they were at the best before hitting the track. Some action shots from the intense racing out of the 12 rounds from the invitational class. Different from normal racing is that this race takes the format of 12 racing rounds with no qualifying and computer generated random starting spots. Here we can see Hara preferred to run the car with only four topdeck screws.  
      All smiles for Hara as he finds a very good well balanced setup towards the end of the event.
        Hara finally got his car sorted in the final round and snagged his first win which allowed him to finish 15th, a bit low for his expectations for sure but on the bright side he has gained a good understanding of the car which will allow him to get better results in the future. Photo Credit: www.redrc.net Setup - W/ XOC
    • Bonsoir tout le monde, Cette seconde manche des GeMC Series s'est déroulée sous le soleil, une superbe journée donc avec une participation de 43 pilotes!
      Retrouvez ci-dessous les résultats de la journée: "http://www.myrcm.ch/myrcm/main?pLa=fr&hId[1]=arv&dFi=genevamodelcars&dId[E]=39338"
      Ainsi que le streaming vidéo de la journée: https://youtu.be/BKlMPuqUX0s N'oubliez pas de noter dans votre calendrier que la manche 3 aura lieu le samedi 28.07.2018 (backup 04.08.2018)! Cordialement,
      S. PS: en cadeau, quelques photos de la journée:  
    • Hello, j'ai recu tres recement les piston d'amortos et l'huile qui va bien. J'ai eu un choc en amical la dernière fois (non du au fait que l'arriere se derobe), le demi train gauche arraché sur un choc, donc j'attends de pouvoir refaire tout ca pour refaire amortos et compagnie, et recommencer sur une base un peu plus saine.
    • Bonsoir tout le monde, Les inscriptions sont ouvertes pour la deuxième manche des GEMC Series 2018! On vous attend nombreux pour cette nouvelle saison pleines de surprises le samedi 2 juin. La piste sera donc réservée à la compétition toute la journée. Les inscriptions en ligne sont ouvertes jusqu’au jeudi 31 mai minuit, autrement ce sera samedi matin au circuit. Pour les visiteurs, vous êtes tous les bienvenus sur le site pour assister à la compétition.  Les inscriptions se déroulent en ligne via myRCM sur cette page: https://www.myrcm.ch/myrcm/main?hId[1]=bkg&dId[E]=39338 En prime, le tracé, sucré naturellement, qu'on vous prépare s'annonce comme démentiel. On se réjouit d'avance! Cordialement,
      S.
    • Autrefois, je roulais dans cette région, mais j'avoue ne pas connaître la piste de Quincieux. Ça a donné quoi au final comme résultat? Cordialement,
      S.  
  • Dernières petites annonces

  • Member Statistics

    • Total Members
      14,895
    • Most Online
      1,583

    Newest Member
    Diadu86
    Joined